应用领域

锡焊 钎焊 印刷 机加 胶粘 风电叶片 半导体芯片 锂电池

产品名称 :Stainless steel welding spot cleaning agent

EC3000B Stainless steel welding spot cleaning agent


Product features
This product is a water-based cleaning agent, which can quickly remove the residual welding spots, polishing wax, stamping grease, metal oxide scale and other contaminants after polishing and welding the stainless steel surface, making the surface of the material cleaner and brighter.  It is widely used in the production process of stainless steel products such as golf equipment, stainless steel electrical appliances, and stainless steel mechanical parts.

Product advantage
● Water-based products are non-combustible, economical and safe.
● It contains special corrosion inhibitor and does not corrode most stainless steel materials and finishes.
● It is convenient to use and can be diluted at high magnification according to the actual situation.


Application range
Used in stainless steel products industry, suitable for 304 and 316 materials, can quickly remove residual welding spots after welding;


Parameter  

  

 

Usage method
High efficiency cleaning agent for stainless steel welding spot can meet the requirements of immersion and ultrasonic cleaning. Different methods can be adopted according to the size of the object to be cleaned, the degree of dirt, the required cleanliness, cost, etc
1) ultrasonic continuous cleaning mode
A. add the cleaning agent into the cleaning device according to the determined use proportion (generally 5% - 8%), and mix evenly;
B. stack the cleaning objects evenly in the cleaning frame according to the specified quantity, and place the cleaning frame at the automatic inlet of the cleaning machine;
C. start the cleaning device, and carry out cleaning according to the cleaning procedure and process determined by the test (including rinsing, drying, etc.);
D. if the detergent consumption is large, it can be used after adding a certain amount of detergent properly, and replace the new detergent thoroughly if necessary;
E. follow up procedures shall be implemented according to the production process requirements of the cleaned materials, workpieces and parts;
2) non batch intermittent cleaning mode
A. add the cleaning agent into the cleaning device or container according to the specified amount, and mix evenly;
B. put the cleaned object into the detergent according to the specified quantity;
C. the cleaning mode can be immersion, manual brushing, scrubbing, or spray auxiliary machine washing;
D. follow up procedures shall be implemented according to the production process of the cleaned articles;

网站地图